• TST Trousers TST Trousers-Protected Areas: Front (Left) and Back (Right)

TST Trousers - 20/30

Fitted with front protection up to the waist, trousers allow excellent mobility and are very popular among operators who frequently move, climb, or crawl. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle.

TST Benefits

  • Fast and easy gear-up to maximize productivity – no fighting with numerous tangled buckles and straps.
  • Resists water and dirt – more durable than alternative suit fabric, keeps operators dry and light.
  • Manufactured with lightweight and flexible Dyneema® – the world's strongest fiber1 – for maximum protection without compromising comfort and mobility.
  • Variety of suit options – perfect for every need and budget.

Trousers

  • Fitted with front protection up to the waist.
  • Zips on the outside of the legs are protected by a sealing velcro flap.
  • Wide, adjustable braces with stretch in the back.
  • Elastic in the rear waist and adjustable band on the sides provide maximum comfort and perfect fit.
  • Trousers are very popular among workers who move a lot, climb or crawl.
  • Trousers have the adjustability to span two normal garment sizes (e.g. the smallest trousers are sized as S/M and fits users who normally wear size small or medium).

Technical Description

  • Outer material: Laminated Polyamide.
  • Inner material: Polyester mesh.
  • Protective material: Special fabric containing Dyneema® fiber.
  • Seams: Taped.
  • Washing instructions: TST Special Grease Remover.
  • CE-marking: Approved according to the directive 89/686/EEC and BGR 191

Test Results

The different levels of protection have been determined by testing according to the table below. Different values (pressure, water flow, nozzle, distance, speed) can give significantly different results.

Test results below apply to all products with the 20/30 Protection Level.

Test 

Pressure
psi (bar) 

Flow
gpm (l/min) 

Nozzles
# - Dia [in (mm)] 

RPM 

Distance
in (mm) 

Linear Speed
in/sec (m/s) 

Result 

Straight Jet

30,000 (2000)

4.7 (17.9)

1 - .031 (0.8)

N/A

3 (75)

20 (0.5)

No Penetration

Rotating Nozzle

43,500 (3000)

5.2 (19.5)

2 - .024 (0.6)

3000

3 (75)

20 (0.5)

No Penetration

 Note 1: Claim refers to strength-to-weight ratio of Dyneema.

TST Hand Protection - 20/30 - Left

Protects the hand and forearm with thumb strap to hold in place. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle. Sold separately. Left Hand.

TST Hand Protection - 20/30 - Right

Protects the hand and forearm with thumb strap to hold in place. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle. Sold separately. Right Hand.

TST Boots 3000

Boots 3000 feature moulded and jointed aluminum gaiters fixed to high quality slip-resistant, steel-toed safety boots. Provide excellent comfort and mobility. Conform to the standards BGR 191 and EN 345-1 99A5 S5. Mens sizes only.

TST Gaiters - 20/30

Gaiters are worn over the operator´s normal safety boots. Fours adjustable straps and velcro closure secure the Gaiters in place. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle. Sold in pairs.

TST Jacket with Integrated Hand Protection - 20/30

Providing full front protection for the torso as well as around the neck and shoulders, this garment also features integrated hand and forearm protection. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle.

TST Waistcoat - 20/30

Provides effective front torso protection as well as around the neck and shoulders.  Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle.

TST Trousers - 10/28

Fitted with front protection up to the waist, trousers allow excellent mobility and are very popular among operators who frequently move, climb, or crawl. Protection Level 10/28: for use at pressures up to 15,000 psi (1000 bar) in applications using a single straight jet or 40,000 psi (2800 bar) in applications using a rotating nozzle.

TST Gamma Kit - 20/30

Provides comprehensive protection and high comfort. The Gamma Kit includes trousers and jacket with integrated Hand Protection. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle.

TST Delta Kit - 20/30

Delta Kits include trousers, waistcoat, and hand protection. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle.

TST Overall with Integrated Hand Protection - 20/30

The Overall is fitted with front protection up to the waist and has hand and forearm protection integrated into the garment. Protection Level 20/30: for use at pressures up to 30,000 psi (2000 bar) in applications using a single straight jet or 43,500 psi (3000 bar) in applications using a rotating nozzle.